If you own a 2015 Dodge Durango and it’s time to reset the oil, you’ve come to the right place. Resetting the oil is an important part of regular maintenance for your vehicle, and knowing how to do it yourself can save you time and money. In this comprehensive guide, we will walk you through the step-by-step process of resetting the oil on your 2015 Dodge Durango.
Step 1: Gather the necessary materials
Before you begin, make sure you have all the materials you will need. This includes a new oil filter, the correct type and amount of oil for your vehicle, a wrench or socket set, and a drain pan to catch the old oil.
Step 2: Locate the oil filter and drain plug
Next, you will need to locate the oil filter and drain plug on your 2015 Dodge Durango. The oil filter is typically located near the engine, while the drain plug can be found on the bottom of the oil pan. Consult your vehicle’s manual if you’re unsure of their exact locations.
Step 3: Drain the old oil
With the drain pan in place, use a wrench or socket set to remove the drain plug. Allow the old oil to drain completely into the pan. Once the oil is drained, replace the drain plug and tighten it securely.
Step 4: Replace the oil filter
Remove the old oil filter using a wrench or filter wrench. Be careful not to spill any remaining oil. Apply a thin layer of new oil to the rubber gasket of the new oil filter, then screw it into place. Make sure it is securely tightened, but do not overtighten.
Step 5: Add the new oil
Locate the oil cap on the top of the engine and remove it. Using a funnel, pour the correct amount of new oil into the engine. Consult your vehicle’s manual for the recommended oil type and capacity. Once the proper amount of oil has been added, replace the oil cap.
Step 6: Reset the oil change light
Finally, it’s time to reset the oil change light on your 2015 Dodge Durango. Start the engine and let it run for a few minutes. Locate the oil reset button on the instrument panel and press and hold it until the oil change light blinks or turns off. Release the button, and you’re done!
By following these simple steps, you can easily reset the oil on your 2015 Dodge Durango and keep your vehicle running smoothly. Regular oil changes are essential for maintaining the health and longevity of your engine, so don’t skip this important maintenance task. Now that you know how to do it yourself, you can save time and money by resetting the oil on your own.
Gather the necessary tools
Before you begin the process of resetting the oil on your 2015 Dodge Durango, make sure you have all the necessary tools. Having everything on hand will ensure a smooth and efficient procedure.
Here is a list of the tools you will need:
| Tool | Description |
| Oil filter wrench | A tool used to remove the oil filter |
| Drain pan | A container to catch the old oil |
| Ratchet wrench | A tool used to remove the drain plug |
| New oil filter | A replacement filter for the old one |
| New oil | The type and amount of oil recommended for your Durango |
| Oil filter gasket | A seal that goes between the new oil filter and the engine block |
| Oil filter cap wrench | A tool used to remove the oil filter cap |
| Funnel | Used to pour in the new oil |
Ensure that you have all these tools readily available before you start the oil reset process. This will save you time and allow you to complete the task without any interruptions.
Safety precautions before starting
Before starting the oil reset process on your 2015 Dodge Durango, it’s important to take some safety precautions to ensure your safety and the proper functioning of your vehicle. Follow these steps:
1. Park your vehicle on a level surface
Make sure you park your Dodge Durango on a level surface to ensure that it doesn’t roll or tilt while you are working on it. This will prevent any accidents or injuries.
2. Engage the parking brake
Before you begin the oil reset process, engage the parking brake to prevent your vehicle from moving while you are working on it. This will provide an additional layer of safety and stability.
3. Allow the engine to cool down
It’s crucial to allow the engine to cool down before attempting the oil reset. This will prevent any burns or injuries that can occur from working on a hot engine. Wait at least 30 minutes after driving the vehicle to ensure the engine has sufficiently cooled down.
4. Wear protective gear
When working with oil and under the vehicle, it’s important to wear the proper protective gear. This includes gloves to protect your hands from oil and chemicals and safety glasses to protect your eyes from any debris that may fall during the process.
5. Gather the necessary tools and materials
Before starting the oil reset process, gather all the necessary tools and materials. This may include an oil filter wrench, an oil drain pan, a new oil filter, and the appropriate type and amount of oil for your vehicle. Having everything ready beforehand will make the process smoother and more efficient.
By following these safety precautions, you’ll ensure a safe and successful oil reset on your 2015 Dodge Durango. Always prioritize your safety and take the necessary steps to protect yourself and your vehicle.
Locate the oil drain plug
The oil drain plug is located underneath the engine of your 2015 Dodge Durango. To find it, you will need to lift up the front of your vehicle using a jack and jack stands for support. Make sure you park your Durango on a flat and level surface before attempting to raise it.
Once your vehicle is safely lifted, you can crawl underneath it and locate the oil pan. The oil pan is a large metal container attached to the bottom of the engine. Look for a small bolt or plug towards the rear of the oil pan. This bolt or plug is the oil drain plug.
Before you begin loosening the oil drain plug, it is recommended to place an oil drain pan or container beneath it to catch the oil that will drain out. This will help prevent any mess and make it easier to dispose of the used oil properly.
With the drain pan in place, use a socket wrench or a set of pliers to carefully loosen and remove the oil drain plug. Make sure to hold onto the plug tightly as you remove it, as it may have a slight amount of pressure behind it from the oil.
Once the oil drain plug is removed, allow the old oil to drain completely into the drain pan. This may take a few minutes, so be patient. While the oil is draining, it’s a good time to inspect the drain plug for any signs of damage or wear. If you notice any issues, it’s a good idea to replace the drain plug with a new one.
After the old oil has finished draining, wipe off the drain plug and the surrounding area to ensure a clean and tight seal. It’s a good practice to also clean off the oil pan with a clean rag to remove any dirt or debris.
Once the oil drain plug and oil pan are clean and dry, you can screw the drain plug back into place. Use your socket wrench or pliers to tighten the drain plug until it is snug, but be careful not to over-tighten it as it could cause damage to the oil pan.
Now that the oil drain plug is securely tightened, you can lower your vehicle back down onto the ground and remove the jack stands. Take your used oil and the oil drain pan to a local auto parts store or recycling center to dispose of it properly.
Congratulations! You have successfully located and removed the oil drain plug on your 2015 Dodge Durango. Now you are ready to refill the engine with fresh oil to keep it running smoothly and efficiently.
Prepare the oil drain pan
Before changing the oil on your 2015 Dodge Durango, it is important to prepare the oil drain pan to catch the old oil. Here are the steps to help you get ready:
- Locate the oil drain plug on the bottom of the engine. It is usually a large bolt-like fitting.
- Position the oil drain pan directly underneath the oil drain plug.
- Ensure that the drain pan is large enough to hold the amount of oil that will come out of the engine.
- Double-check that the drain pan is clean and free from any debris or dirt that could contaminate the oil.
- Secure the drain pan in place, making sure it is stable and won’t tip over during the oil change.
By properly preparing the oil drain pan, you can ensure a clean and safe oil change for your 2015 Dodge Durango.
Remove the oil drain plug
Before beginning the oil reset process on your 2015 Dodge Durango, it’s important to remove the oil drain plug to allow the old oil to drain out completely. Here are the steps to remove the oil drain plug:
Step 1: Safety precautions
Ensure that your vehicle is parked on a level surface and the engine is cool to avoid any accidents or injuries. Also, gather the necessary tools and materials, including an oil pan to catch the drained oil.
Step 2: Locate the oil drain plug
The oil drain plug is typically located on the bottom of the engine’s oil pan. Use a flashlight if needed to help locate it.
Step 3: Position the oil pan
Place the oil pan directly underneath the oil drain plug to catch the oil as it drains out. Make sure it is positioned in a way that will collect all the oil and avoid any spillage.
Step 4: Loosen the oil drain plug
Using a wrench or socket wrench, carefully loosen the oil drain plug by turning it counterclockwise. Be cautious not to remove the plug entirely at this point, as the oil might start draining out immediately.
Step 5: Remove the oil drain plug
Once the oil drain plug is loosened, carefully unscrew it completely and keep it aside. Allow all the old oil to drain out completely into the oil pan.
With the oil drain plug removed, you can proceed with the oil reset process on your 2015 Dodge Durango. Make sure to dispose of the old oil properly and replace the oil drain plug securely after the reset is complete.
Let the oil drain completely
Once you have removed the oil drain plug and allowed the old oil to drain out, it is important to let it drain completely before proceeding with the oil reset process. This will ensure that all of the old, dirty oil has been removed from the engine and will make room for fresh, clean oil.
It is recommended to let the oil drain for at least 10-15 minutes. During this time, you can inspect the oil drain plug for any damage or wear and replace it if necessary. It is also a good idea to check the oil filter and replace it if needed.
How to ensure the oil drains completely:
- Place a drain pan or container underneath the oil drain plug to catch the old oil.
- Wait until the oil slows down to a drip or stops flowing completely, indicating that the oil has drained fully.
- Double-check that the drain pan is properly positioned and secure to avoid any spills or leaks.
By allowing the oil to drain completely, you are ensuring that your Dodge Durango’s engine will be filled with fresh, clean oil during the oil reset process. This will help maintain the performance and longevity of your vehicle’s engine.
Replace the oil drain plug
Replacing the oil drain plug is an important step in resetting the oil on a 2015 Dodge Durango. Here is a step-by-step guide on how to replace the oil drain plug:
- Ensure that the engine has cooled down before beginning the process.
- Locate the oil drain plug underneath the vehicle. It is usually located on the bottom of the engine.
- Place a drain pan or container directly underneath the oil drain plug to catch the old oil.
- Using a wrench or socket, carefully loosen and remove the oil drain plug, turning it counterclockwise.
- Allow the old oil to drain completely into the drain pan.
- Inspect the oil drain plug for any damage or wear. If necessary, replace it with a new one.
- Clean the oil drain plug with a rag or towel to remove any debris or old oil.
- Apply a small amount of oil to the threads of the new oil drain plug to ensure a proper seal.
- Hand tighten the new oil drain plug into place, and then use the wrench or socket to tighten it further. Be careful not to over-tighten.
- Once the oil drain plug is securely in place, you can proceed to the next steps in resetting the oil on your 2015 Dodge Durango.
Replacing the oil drain plug is a simple task that ensures the proper function and integrity of your vehicle’s oil system. By following these steps, you can confidently reset the oil on your 2015 Dodge Durango and maintain its performance.
Find the oil filter
The oil filter on a 2015 Dodge Durango is located underneath the vehicle, towards the front, near the engine. It is important to locate the oil filter before attempting to reset the oil, as you will need to access it in order to replace it.
To find the oil filter, follow these steps:
- Ensure that the vehicle is parked on a level surface and the engine is turned off.
- Locate the front of the engine compartment and open the hood.
- Look for the oil filter cap, which is a round plastic or metal housing with a removable top.
- If you are having trouble locating the oil filter cap, consult your vehicle’s owner’s manual for specific instructions.
Once you have located the oil filter cap, you can proceed with resetting the oil on your 2015 Dodge Durango.
Install the new oil filter
Once you have drained the old oil and replaced the drain plug, it’s time to install the new oil filter. Start by inspecting the new filter and ensuring that it matches the make and model of your 2015 Dodge Durango. This is crucial, as using the wrong filter can lead to various engine issues.
Locate the oil filter housing on the engine block. It is usually located near the front of the engine and is a cylindrical-shaped component. Use a wrench to loosen the housing and remove it carefully. Be prepared for some residual oil to spill out, so have a bucket or oil pan handy to catch any drips.
Once the housing is removed, remove the old filter from inside. Inspect the housing for any debris or sludge that may have accumulated, and clean it if necessary. Apply a small amount of clean engine oil to the rubber gasket on the new filter to ensure a proper seal.
Install the new filter into the housing, making sure it is properly aligned and securely tightened. Use a wrench to tighten the housing, but be careful not to overtighten, as this can cause damage to the housing or filter. Refer to your vehicle’s owner manual for the recommended torque specification.
Once the new oil filter is securely installed, proceed with adding the recommended amount and type of oil to your 2015 Dodge Durango. Be sure to double-check the oil level and make any necessary adjustments before starting the engine.
Question-answer:
Is it necessary to reset the oil on a 2015 Dodge Durango?
Yes, it is necessary to reset the oil on a 2015 Dodge Durango. Resetting the oil life percentage ensures that you receive accurate notifications when it’s time to change the oil in your vehicle. It helps you keep track of the oil’s condition and maintain the performance and longevity of your engine.
Can I reset the oil on a 2015 Dodge Durango without using the steering wheel controls?
No, resetting the oil on a 2015 Dodge Durango requires using the steering wheel controls. The process is specifically designed to be done through the vehicle’s onboard computer system, accessed through the steering wheel buttons. It is not possible to reset the oil without using these controls.
What happens if I don’t reset the oil on my 2015 Dodge Durango?
If you don’t reset the oil on your 2015 Dodge Durango, the oil life percentage will not be accurate, and you may receive false notifications for an oil change. This can lead to improper maintenance of your vehicle’s engine, potentially causing damage or reducing its overall performance. It is important to reset the oil to ensure you have an accurate indication of when to change the oil.